About PBT 420SEO

PBT is a milky white translucent to opaque, crystalline thermoplastic polyester. Has the advantages of high heat resistance, toughness, fatigue resistance, self lubrication, low friction coefficient, weathering resistance, low water absorption rate, only 0.1%, in the humid environment remains properties (including electrical properties), electrical insulation, but the volume resistivity, dielectric loss. Water resistance, alkali, acid, oil, halogenated hydrocarbons but are vulnerable to erosion, hydrolysis resistance, low temperature crystallization can be rapidly, good formability. Drawback is the low impact strength, high mold shrinkage. It is mostly filled with glass fiber reinforced or inorganic modification, the tensile strength, bending strength can be increased one times above, thermal deformation temperature is also significantly improved. Can work at 140 ℃, glass fiber reinforced products longitudinal, transverse shrinkage is not consistent, easy to make the product warpage.

Applications:Electrical/Electronic Applications;General Purpose.

Buy PBT .

About PBT 4830

PBT, which belongs to the polyester series, is composed of 1.4-pbt butanediol (1.4-Butylene glycol) and terephthalic acid (PTA) or terephthalate (DMT) poly condensation, and the mixing procedure is milky white translucent to opaque, crystalline thermoplastic polyester resin through. Together with PET, collectively referred to as the thermoplastic polyester, or saturated polyester.

Features:

1)excellent electrical property
2)excellent temperature resistance, high heat distortion temperature.
3)excellent mechanic and chemical property
4)excellent weatherability
5)excellent wear property
6)excellent moldability
7)high resistance to fuels, oil, fats and many solvents

Specification:PBT glass fiber 30% reinforced injection molding grade.

CA AB33-1566

Application: automotive paint, plastic paint, wood coatings, inks, leather coatings, paper coating, pigment dispersion medium. In the conversion coatings as additives in the coating, as film material thermoplastic.
Properties of cellulose acetate, CA plastic: high transparency (transmittance >90%), coloring ability outstanding, excellent scratch resistance, good dimensional stability, high surface gloss, weak static (gathering dust also no problem), easy casting or extrusion. Mainly used in household products / goods, uses of the optical glasses. Two, high barrier properties of EVOH: outstanding gas barrier, the grease resistance, meet the requirements of FDA, excellent chemical resistance, barrier properties. Typical applications of optical (copier and printer of high precision lens, camera, projection TV, mirror, CD), the field of medicine, electronic devices, packaging field.

About Cellulose acetate butyrate(CAB)

Cellulose acetate butyrate(CAB) is a very beneficial additive for resolving a number of surface defects such as cratering,fish eyes,and 'orange peel' in various coatings based on different binders.'Orange pell' is a term to describe an uneven surface with an appearance similar to that of the surface of an orange.This benefit was demonstrated by formulating a thermosetting melamine-acrylic clear coat with and without Eastman cellulose acetate butyrate appplied over a commercial red base coat.
Buy Cellulose acetate butyrate(CAB) 

PA6 1010C2

PA6 1010C2 features

1). Excellent strength and durability, rigidity and heat resistance combined with excellent

2). Coloring excellent surface appearance, perfect, can be applied to the structure forming complex, and helped design the new developers other products

3). Good processability, fluidity and excellent thermal stability make the material more relaxed conditions, the injection molding miniature

4). The thermal stability of high, can not hang up tin soldering tin 270 degree, has good dimensional stability and low warpage, solderability and paint, spraying, ultrasonic welding, material can be a good gloss, can be dyed various colors
Buy PA6 1010C2

About PA6 73G45HSL

Application of PA6 in industry
Polyamide fiber reinforced materials according to the characteristics of the product requires the addition of glass fiber content in the range of 5-60%, this material has good strength, heat resistance, excellent impact resistance, good dimensional stability and low warpage.
Features

1). Excellent strength and durability, rigidity and heat resistance combined with excellent

2). Coloring excellent surface appearance, perfect, can be applied to the structure forming complex, and helped design the new developers other products

3). Good processability, fluidity and excellent thermal stability make the material more relaxed conditions, the injection molding miniature

4). The thermal stability of high, can not hang up tin soldering tin 270 degree, has good dimensional stability and low warpage, solderability and paint, spraying, ultrasonic welding, material can be a good gloss, can be dyed various colors

AES HW600HI

Application of AES: rearview mirror housings, brackets , door trim, rope flow hood / rain gutters, air conditioner outdoor unit road signs , PVC composite board park tables , motorcycle, bicycle parts , motorboat , sailboat parts , skis , AES only is an excellent weather resistance resin , due to the low Tg EPDM rubber phase , so that AES has more than ASA 's excellent low temperature impact resistance , and therefore increasingly being used for other needs and long- life automotive components , safe and reliable plastic products. Without advantage to AES painting more competitive on price . In the field of consumer electronics , AES weather resistance also means that even if long-term use , but also better able to maintain the original products fresh bright colors . 1 ) Excellent weather resistance, light characteristics of AES in the sunlight is very stable, even in the long outdoor exposure , ABS resin, its color and physical properties change little AES ( physicochemical properties ) is often used with excellent formability, corrosion impact resistance and gloss properties, but the ABS is used in the synthesis of a butadiene rubber containing double bonds , it is easy to ultraviolet radiation, thermal oxidative decomposition, etc. , when necessary long-term use where weather resistance , physical properties appear and reduce discoloration and so on. Although additives can be used to solve this problem, but the long-term stability of the resin stabilizer role is limited, so the most fundamental way is to use the stability of the rubber does not contain a double bond structure.Application: rearview mirror housings, brackets , door trim, rope flow hood / rain gutters, air conditioner outdoor unit road signs , PVC composite board park tables , motorcycle, bicycle parts , motorboat , sailboat parts , skis , electric scales car , advertising standard .AES ( acrylonitrile / EPDM / styrene copolymer ) is for ABS poor weather resistance and development of new varieties of engineering plastics , AES resin content less EPDM ( EPDM ) molecular chain double bond , the AES weatherability 4-8 times higher than the ABS, the thermal stability of the AES ! ​​superior water absorption and impact strength of ABS resin , ABS and other properties are similar.

AES HW600

AES resin (acrylonitrile -EPDM rubber - styrene copolymer ) having excellent weather resistance, even after prolonged exposure to ultraviolet light in outdoor , moisture , rain, ozone , and the light conditions , without the coating properties can be maintained stable . Especially for not painting directly outdoors.AES is not just an excellent weather resistance resin , due to the low Tg EPDM rubber phase , so that AES has more than ASA 's excellent low temperature impact resistance , and therefore increasingly being used for other needs and long- life auto parts , safe and reliable plastic products. Without advantage to AES painting more competitive on price . In the field of consumer electronics , AES weather resistance also means that even if long-term use , but also better able to maintain the original products fresh bright colors .Excellent weather resistance, light characteristicsAES is very stable in sunlight , even in outdoor exposure for a long time , its color and physical properties change little dry conditions : 80 ~ 85 ℃ ( heat AES :90-100 ℃) and dried under at least 3-4 hours ; AES material hygroscopic and require drying prior to processing ; materials should ensure that less than 0.1% moisture .Processing temperature : 200 ~ 260 ℃, the temperature was increased heat AES 10 ℃, in a high temperature should not be too long barrel residence time ( less than 30 minutes ) ;Mold temperature : 40 ... 80 ℃; injection pressure : 500 ~ 800bar; injection speed : the speed ; screw back pressure :10-40bar.Buy AES HW600

About ASA XC-220

ASA resin, with high liquidity and high gloss characteristics of; widely used in outdoor weathering products and demand. Extrusion grade ASA resin for extrusion sheet and pipe fittings; pan used for building materials and vehicle parts.
ASA200FR is an ultra-high weather-retardant ASA, flame retardant grade 1.5mm-V0, has excellent thermal stability and processing light resistance;
ASA200FR has been widely used in satellite antenna boxes, electrical control box, battery housings, automotive sunroof and automatic watering machine enclosure and is especially suitable for light-colored products.

About ASA XC-190

ASA is styrene, acrylonitrile and acrylic rubber of polymerization. Technically, ASA not only to maintain the main characteristics of the ABS and combines the advantages of acrylic weather makes outdoor purposes can be extended to the application of the product. Weatherability, long-term use, color stability, as well as PC / PVC good compatibility, making ASA resin becomes wider and higher value; covered the steam locomotive parts, construction parts, outdoor sporting goods, gardening parts, outdoor antenna parts, electrical and electronic products, toiletries ... and so on. In addition, ASA also reduces the processing costs of painting and electroplating secondary processing, the product has a lower cost and environmentally friendly features.

ASA XC-190 resin, with high liquidity and high gloss characteristics of; widely used in outdoor weathering products and demand. Extrusion grade ASA resin for extrusion sheet and pipe fittings; pan used for building materials and vehicle parts.

Heat ASA resin suitable for high temperature demand for the products. Generally used for heating electrical enclosures, automotive components, such as mirrors, front bar and other tanks
Buy ASA XC-190

Information about EVA E180F

EVA E180F is the new environmental protection plastic packing material, has the good cushion, the earthquake resistance, the heat preservation, moisture-proof, experiments the academic society anti-corrosive and so on, and has the non-toxic evil, does not absorb water. It may use in processing the design, shocks proof the performance to compare the polystyrene (froth) and so on tradition packing materials, it also meets the environmental protection requirement.

EVA resin is widely used. In general, vinyl acetate content of 5% or less of the EVA, its main products are film, wire and cable, LDPE modifiers, adhesives, etc.; vinyl acetate content of 5% to 10% of EVA products as flexible films, etc.; vinyl acetate content of 20 ~ 28% of EVA, is mainly used for hot melt adhesives and coatings products; vinyl acetate content of 5% to 45%, mainly products for the film (including agricultural film) and sheets, plastic injection, molding products, foam products, hot melt adhesives. Such as:
(1) films, sheets and laminated products: with sealing, adhesion, flexibility, strength and toughness, tight, suitable for flexible packaging film, shrink film, agricultural film, food packaging film, laminated film, you can use do polyolefin laminated film in the middle layer.
(2) General supplies: with flexibility, resistance to environmental stress cracking resistance, weather and good benefits for industrial electrical wire insulation material bag, accessories for electrical appliances, windows and sealing materials.
(3) grocery class of sporting goods, toys, cushions, straps, sealed container, cover, EVA rubber football.
(4) Auto Parts have shock absorbers, fender, both interior and exterior car accessories.
(5) Foam Products: pressure foam with foam slippers, sandals, construction materials. There are a variety of industrial plastic foam parts, female soles, hot melt adhesives.

The Introduction of ABS 777D11

ABS 777D,Acrylonitrile – styrene – butadiene copolymer, abbreviated ACRYLONITRILE BUTADIENE STYRENE（ABS） is an acronym, is a high strength, good toughness, easy processing of forming thermoplastic polymer material is acrylonitrile (ACRYLONITRILE), 1,3 – butadiene (BUTADIENE), styrene (STYRENE) three kinds of monomers of the graft copolymer, suitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.
Feature1, the overall performance is better, high impact strength, chemical stability, good electrical properties.
2, and 372 glass of good welding, plastic parts made ​​of color, and can be chrome plated, paint treatment.
3, there are high impact, high heat resistance, flame retardant, enhanced level of transparency and so on.
4, more mobile than HIPS almost, than PMMA, PC and other good, good flexibility.
Usessuitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.
Molding characteristics1 amorphous materials, liquid medium, large moisture, must be fully dry, the surface gloss of the plastic parts required to be a long dry and warm 80-90 degrees, 3 hours.
(2) should take the high melt temperature, high mold temperature, but too easy to break down the material temperature (decomposition temperature> 270 degrees). For high precision plastic parts, mold temperature should take 50-60 degrees, high gloss. Resistance thermoplastic parts, mold temperature 60-80 degrees should be taken.
3 Watermark folder for solutions, the need to improve material flow, material to high temperature, high mold temperature, or change into water and other methods.
4, such as forming heat-or flame-retardant grade material, production 3-7 days after the remnants of the plastic mold surface decomposition, leading to the mold surface shiny, take time to clean up the mold, the mold surface, while the need to increase the exhaust position.
Buy  ABS 777D。

SBS YH-803

SBS styrenic thermoplastic elastomer, styrene, butadiene is three block copolymer monomer, the characteristics of both plastic and rubber, known as "the third generation of synthetic rubber". Similar to styrene butadiene rubber, SBS and water, acid, alkali and other contact, has excellent tensile strength, surface friction coefficient, good low temperature performance, excellent electrical properties, good processing performance and other characteristics, has become the largest consumer of thermoplastic elastomer.

SBS has a thermoset rubber and incomparable advantages in processing application:

(1) available thermoplastic processing equipment for processing molding, extrusion, blow molding, such as injection, molding speed than traditional vulcanized rubber technology fast;

(2) without curing, curing process of thermoset rubber can be omitted in general in the process, and less equipment investment, low energy consumption, simple process, short processing cycle, high production efficiency, low processing cost;

(3) plus angular excess material can be reused many times, saving resources, environmental protection.

Now the SBS is mainly used in rubber products, resin modifier, binder and asphalt modifier four should domain. In the rubber products, SBS molded products mainly used in shoemaking industry (sole), extrusion products mainly used in rubber hose and belt; as the resin modifier, a small amount of SBS and polypropylene (PP), polyethylene (PE), polystyrene (PS) low temperature performance and impact strength of the blends can significantly improve the products; SBS as binder with high solids content, quick drying, low temperature resistance characteristics; SBS as modifier of asphalt and asphalt road construction can be significantly improved asphalt weathering resistance and load performance.

About PVC

Polyvinyl chloride, referred to as PVC  is composed of vinyl chloride in initiator polymerization under the action of a thermoplastic resin. Is a homopolymer of vinyl chloride. Vinyl chloride homopolymer and vinyl chloride copolymer called vinyl chloride resin. PVC is white powder of amorphous structure, the degree of support. The molecular weight of the PVC industry in general 50000 ~ 120000 range, with larger polydispersity, molecular weight increases with decreasing polymerization temperature; no fixed melting point, 80 ~ 85 ℃ begins to soften, 130 ℃ for viscoelastic state, 160 ~ 180 ℃ begins to change into the viscous flow has better mechanical properties; the tensile strength, impact strength of about 60MPa, 5 ~ 10kJ/m2; has excellent dielectric properties. But the light and heat stability is poor, at 100 DEG C or after long time exposure to sunlight, will decompose and produce hydrogen chloride, and further Autocatalytic Decomposition, causing discoloration, physical and mechanical properties decreased rapidly, in practical applications must be added stabilizer in order to improve the stability of heat and light. PVC is very hard, the solubility is very poor, can only dissolve in cyclohexanone, two trichloroethane and tetrahydrofuran and a solvent, organic and inorganic acid, alkali, salt are stability, chemical stability decreases with increasing temperature. PVC dissolved in acetone carbon disulfide or acetone mixed solvent of benzene, used in dry or wet spinning and fiber, called polyvinyl chloride, is difficult to burn, acid and alkali resistant, anti microbial, wear-resistant and with warmth and good elasticity.

The Introduction of EVA E180F

EVA E180F is the new environmental protection plastic packing material, has the good cushion, the earthquake resistance, the heat preservation, moisture-proof, experiments the academic society anti-corrosive and so on, and has the non-toxic evil, does not absorb water. It may use in processing the design, shocks proof the performance to compare the polystyrene (froth) and so on tradition packing materials, it also meets the environmental protection requirement.

EVA resin is widely used. In general, vinyl acetate content of 5% or less of the EVA, its main products are film, wire and cable, LDPE modifiers, adhesives, etc.; vinyl acetate content of 5% to 10% of EVA products as flexible films, etc.; vinyl acetate content of 20 ~ 28% of EVA, is mainly used for hot melt adhesives and coatings products; vinyl acetate content of 5% to 45%, mainly products for the film (including agricultural film) and sheets, plastic injection, molding products, foam products, hot melt adhesives. Such as:
(1) films, sheets and laminated products: with sealing, adhesion, flexibility, strength and toughness, tight, suitable for flexible packaging film, shrink film, agricultural film, food packaging film, laminated film, you can use do polyolefin laminated film in the middle layer.
(2) General supplies: with flexibility, resistance to environmental stress cracking resistance, weather and good benefits for industrial electrical wire insulation material bag, accessories for electrical appliances, windows and sealing materials.
(3) grocery class of sporting goods, toys, cushions, straps, sealed container, cover, EVA rubber football.
(4) Auto Parts have shock absorbers, fender, both interior and exterior car accessories.
(5) Foam Products: pressure foam with foam slippers, sandals, construction materials. There are a variety of industrial plastic foam parts, female soles, hot melt adhesives.

Description of the ABS 15A1

ABS 15A1  resin is a terpolymer of three monomers from the graft copolymerization of three monomers in the ratio of the combination of different, will have a direct impact on the  ABS 15A1range of performance, such as allene content increase can play to improve the oil resistance and chemical resistance of  ABS 15A1; increase in butadiene can improve the impact toughness of the ABS; styrene can provide a good molding plus performance; so the world take advantage of this, and the introduction of various kinds of additives, production grade  ABS 15A1 performance use different, such as general purpose grade, anti-leveling, high impact, cold level heat-resistant grade, flame retardant, enhance the level grade of the resin due to its comprehensive excellent mechanical properties, the price is relatively cheap, good rigidity and dimensional stability, as well as forming a good performance and processing advantages, has been widely applied in various fields of national economy.
Typical applications range car (dashboard, tools, doors, wheel covers, mirror boxes, etc.), refrigerators, high-intensity tools (hair dryer, blender, food processing machines, lawn mowers, etc.), telephone shell , typewriter keyboard, recreational vehicles such as golf trolleys and jet sled cars, toys and so on.

ABS with FR-PPR

Specification:10% GF enhancing,20% GF enhancing,30% GF enhancing

Application:ABS with FR-PPR is used in the substrate of television,recorder ,air condition,camera and so on.

The application fields of TPU, such as softball shoes, baseball shoes, golf shoes, football shoes sole and shoe sole, lady shoes; ski boots; safety boots, high-grade sole, handle; strap, pipes, hoses, pipes, hoses, handle; strap; in the film, TPU film is a green film, is the best material to replace Pvc film, with other plastics and rubber can not match the high strength, high toughness, wearability, oil resistance, cold resistance, aging resistance, non-toxic environmental protection and other excellent characteristics. The main raw material TPU and material advantages, TPU material is: light, comfortable, good elasticity, species and degradability; also has the waterproof, cold, antibacterial, anti UV advantage. TPU is widely used in shoes, mountaineering shoes, snow shoes, golf shoes, shoes, ice skates, field shoe decoration, air cushion, the sole air cushion or liquid filling pad, at present, our country shoe manufacturers mainly concentrated in Guangdong, Fujian and Zhejiang. Guangzhou, Jinjiang, Wenzhou, Chengdu is the four big shoes. The best material is made of TPU hose, hose to TPU as a raw material with good elasticity, oil resistant, soft and excellent aging resistance, and the strength is very good.

TPU 85AE

The main characteristics of TPU:
Wide range of hardness: by changing the TPU of the reaction components, we can get different hardness of the product, and along with the increase of hardness, its product still maintain elasticity and excellent abrasion resistance.

High mechanical strength: TPU products carrying capacity, impact resistance and shock absorption performance highlights.

Cold prominent: TPU glass transition temperature is relatively low, at 35 degrees below zero and still keep the good elasticity, flexibility and other physical properties.

Processing performance is good: the processing method of TPU can adopt a common thermoplastic material processing, such as injection molding, extrusion, calendering and so on. At the same time, the joint processing of TPU and some polymer materials can be complementary in property of polymer alloy.

Oil resistance, water resistance, mold resistance.

What is TPU 345

TPU is thermoplastic polyurethane, a polyester-and polyether type of points, it is the hardness range (60HA-85HD), wear-resistant, oil resistant, transparent, flexible, and the daily necessities, sporting goods, toys, decorative material, and is widely applications, halogen-free flame retardant TPU soft PVC can also be replaced to meet the growing field of environmental protection requirements. TPU grades of many brands of varying quality, choose TPU After a detailed assessment of the best arguments, or can not be cost-optimal results. TPU of this material can be softened to some Redu, and can be maintained at room temperature . with more than the shoe stable, supporting role.

Features

1,Wide range of hardness: TPU by changing the ratio of the reaction components, you can get different hardness of the product, and with the increase in hardness, and its products still maintain good flexibility and abrasion resistance.
2,High mechanical strength: TPU products, carrying capacity, outstanding impact resistance and shock absorption.
3,Cold outstanding: TPU glass transition temperature is relatively low, at minus 35 degrees still maintain good elasticity, flexibility and other physical properties.
4,Processing performance: TPU thermoplastic material can be a common processing method for processing, such as injection molding, extrusion, rolling, and so on. At the same time, TPU polymer materials with certain properties can be processed together complementary polymer alloy.Oil, water, mold-resistant. Recycling is good.

ABS HI121H

ABS also can be said to be modified polystyrene, impact strength and better mechanical strength is higher than HIPS, has a good processing performance, can be used in injection molding machine, extrusion machine plastic molding equipment for injection molding, extrusion, blow molding, calendering, laminated, foaming, hot forming, welding, coating can also be and mechanical processing, electroplating. ABS water absorption is relatively high, the processing should be done before the drying process, the drying temperature was 70~85 ℃, the drying time is 2~6h; ABS products easy to produce the internal stress in the processing, such as the stress is too large, causing the product to be annealed, cracking, the product is placed in the 70~80 ℃ hot air circulation drying oven 2~4h, then cooling to room temperature.

Features:Good Impact Resistance

Appearance:White Pellets

Processing Method: Injection Molding
Specification:General

Application:The shell of household electrical appliances,such as air condition,dust collector,washing machine,colour TV,water dispenser,telephone set,blower ,warmer and so on.

More about ABS HI121H

AS 80HF

Injection molding process
AS processing temperature is generally preferably at 200-250 ℃
The melting temperature of 200-270 ℃ AS
Mold temperature of 40-80 ℃ AS
AS 350-1300bar injection pressure injection speed recommended speed injection
SAN (AS) has a strong ability to withstand load, anti-chemical reaction capability, thermal deformation characteristics and geometric stability. SAN (AS) in the glass fiber additives can increase the strength and thermal deformation, reducing the thermal expansion coefficient. SAN (AS) has a Vicat softening temperature of about 110 ℃. Deflection temperature under load is about 100 ℃. SAN (AS) of the shrinkage of about 0.3-0.7%. SAN (AS) is a hard, transparent material. The styrene content SAN (AS) hard, transparent and easy to process; acrylonitrile content the SAN (AS) having chemical stability and thermal stability.

About AS PN-117

SAN (AS)  has a strong ability to withstand load, anti-chemical reaction capability, thermal deformation characteristics and geometric stability. SAN (AS) in the glass fiber additives can increase the strength and thermal deformation, reducing the thermal expansion coefficient. SAN (AS) has a Vicat softening temperature of about 110 ℃. Deflection temperature under load is about 100 ℃. SAN (AS) of the shrinkage of about 0.3-0.7%. SAN (AS) is a hard, transparent material. The styrene content  SAN (AS)  hard, transparent and easy to process; acrylonitrile content the SAN (AS) having chemical stability and thermal stability.
Applications
Electrical (socket, shell, etc.), household goods (kitchen appliances, refrigerator unit, TV stand, cassette boxes, etc.), automotive (car headlights box, reflective environment, dashboards, etc.), household items (cutlery, food and tools etc.), cosmetics packaging. Widely used to produce oil, heat resistance, chemical industrial products, and instrument panels, instrument box, cover, battery box, junction box, a variety of switching and by its rules.

About PB-5903

PB-5903 process characteristics: K material low water absorption, no need for drying before processing, if K is expected for a long time in high humidity environments open storage, you need to drying (65 ℃ less), and good fluidity, easy processing, the processing of a wide temperature range, typically between 170 ~ 250 ℃, non-crystalline, low shrinkage (0.4 ~ 0.7%). K material above 260 ℃, if the melt residence time in the barrel length ( more than 20 minutes), will lead to thermal degradation, affecting its transparency, and even color brittle. appropriate "low, medium, medium temperature" condition molding, mold temperature should be between 20 ~ 60 ℃, thicker products, After removing the cooling water can be placed to obtain a uniform cooling to avoid cavitation.
PB-5903 Application: cups, lids, bottles, hinge-type boxes, clothes hangers, toys, PVC alternative feed products, food packaging and pharmaceutical packaging supplies.

About KR03

Features:Copolymer,Ethylene Oxide Sterilizable,Food Contact Acceptable,Good Stiffness,Good Toughness,High Clarity,High Gloss,Radiation Sterilizable.
Applications:Compounding;Containers;Cups;Drink Lids;Food Containers;Food Packaging;Household Goods;Housings;Medical/Healthcare Applications;Packaging;Toys

ASA XC-180

ASA resin blending technology mainly in the production process, the main raw material powder and AS ASA resins and pigments, antioxidants, internal and external lubricant.
Major equipment for twin-screw extruder, other ancillary equipment also includes high-speed batching machines, automatic weighing feeder, cooling granulating machine, automatic packaging machines, quality testing equipment (melt index tester, universal testing machine, etc.), when the production reaches a certain size also need product silos.
Modified resin (ASA) is an acrylonitrile , styrene , acrylic rubber formed in the 1970s, the successful development of terpolymer, are impact-modified resins.
ASA is an acrylonitrile , styrene , acrylic rubber (Acrylate) formed in the 1970s, the successful development of terpolymer, are impact-modified resins.

ASA XC-811

1, ASA has good mechanical and physical properties
ASA and ABS structurally similar , consisting of acrylonitrile and butadiene rubber , which retained the ABS engineering plastics with excellent mechanical and physical properties.
2, ASA has a strong weather resistance
Polymers if they contain a double bond, double bond likely to be greater the energy intensity of the sun's ultraviolet rays are open , the resulting polymer aging resistance decreased , while the ASA is free of unsaturated double bond is replaced with ABS acrylic rubber containing an unsaturated double bond in a butadiene rubber , therefore , not only to resist degradation caused by ultraviolet radiation , aging, fading, while the oxidation in the atmosphere caused by high temperature processing of decomposition or discoloration have a strong protection , thereby greatly enhancing the material aging and weathering properties . According to the test results , ASA ABS anti-aging properties is more than 10 times .
3, ASA has good high temperature performance
4, ASA is an anti -static material , the surface can accumulate less dust
ASA applications
Automotive : ASA in continuing long after the wind , not like the special treatment of the ABS anti-aging , as had become gray ( because wind or water caused cracks in the surface of many microscopic cavitation ) . ASA is typically used outside mirrors , radiator grille, rear bumpers , lampshades withstand sun and rain , strong winds and other harsh conditions of the external components. Currently, it is gradually extended to the motorcycle panels, camping cars, small hull , surfboards and other fields.
Buy ASA XC-811

About ASA XC-220

ASA is a styrene, acrylonitrile and acrylic rubber of polymerization. Technically, ASA not only to maintain the main characteristics of the ABS and Acrylic weather combined with the advantages of making the product's application can be extended to outdoor purposes. Weatherability, long-term use, color stability, as well as PC / PVC good compatibility, making the ASA became broader and higher value of the resin; Jufan vehicle parts, construction parts, outdoor sporting goods, gardening parts, an outdoor antenna parts, electrical and electronic products, toiletries ... and so on. In addition, ASA also reduces the secondary processing of the coating and electroplating processing costs, products with lower cost and environmentally friendly features.

About ASA XC-190 features

ASA XC190 with high anti-collision impact resistance, weather resistance affect performance, UV protection properties, high stiffness, high heat resistance, toughness, aging resistance, high impact resistance, widely used in the radiator grille and bumper sunroof , outside mirrors, rear license plate bracket luggage fog taillight trim pillar trim, the other lights and other grades.
Buy ASA XC190 .

About ABS HAB8740

PBT / ABS alloy is a kind of engineering plastic with excellent performance, maintaining a good process ability of PBT, heat resistance, cold resistance is high, excellent chemical resistance, improved impact toughness of the PBT and dimensional stability. PBT / ABS reinforced by glass fiber after dimensional stability and impact resistance, a significant improvement on the war page.

Characteristics: excellent cold resistance, good shock resistance, ABS / PBT alloys.
Uses: used car bumpers and bumper frame, copiers, office supplies such as Shell.

more about HAB8740

About PC 9425C

PC application is very extensive.Such as sun shed,bulletproof glass, transparent in fraredlenses,sunglasses, cell phone case,laptop case, connectors, medical equipment, bottles,films and many other products.PC weather resistance,high rigidity,excellent impact resistance, high temperature resistance.PC as the main component of plastic alloy materials are also a lot of PC / ABS, PC / PBT, PC / PMMA, etc., which PC / ABS plastic alloy is currently the most widely used plastic alloy,in shell, skeleton,one lectrical components is widely used.

About PA6 CM1017

Features:Good heat resistant,good weather resistant,excellent rub-resistant, good hygroscopy, excellent insulating property

Specification:Injection Molding Grade

Applications:Automotive, electrical and electronic industry, transport, machinery manufacturing industry, wire and cable communications, film and daily necessities.